JavaScript Glossary
Update: Cheat Sheets BETA is here!
- Introduction to JavaScript: Introduction
- Introduction to JavaScript: Conditionals
- Introduction to JavaScript: Functions
- Introduction to JavaScript: Scope
Arrays
Accessing array elements
You can get elements out of arrays if you know their index. Array elements’ indices start at 0 and increment by 1, so the first element’s index is 0, the second element’s index is 1, the third element’s index is 2, etc.
Syntax
array[index];
Example
var primes = [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37];primes[0]; // 2primes[3]; // 7primes[150]; // undefined
Array literals
You can create arrays in two different ways. The most common of which is to list values in a pair of square brackets. JavaScript arrays can contain any types of values and they can be of mixed types.
Syntax
const arrayName = [element0, element1, ..., elementN]
Example
const primes = [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37];
Read more
Multi-dimensional Arrays
A two-dimensional array is an array within an array. If you fill this array with another array you get a three-dimensional array and so on.
Example
// Two dimensions, 3x3const multidimensionalArray = [[1,2,3],[4,5,6],[7,8,9]]
Array constructor
You can also create an array using the Array constructor.
Example
const stuff = new Array();stuff[0] = 34;stuff[4] = 20;stuff;// [34, undefined, undefined, undefined, 20]
Example
const myArray = new Array(45 , 'Hello World!' , true , 3.2 , undefined);console.log(myArray);// output: [ 45, 'Hello World!', true, 3.2, undefined ]
Read more
Accessing nested array elements
Accessing multi-dimensional array elements is quite similar to one-dimension arrays. They are accessed by using [index][index]….. (number of them depends upon the number of arrays deep you want to go inside).
Syntax
array[index][index] //...
Example
const myMultiArray = [[1, 2, 3, 4, 5, [1, 2, 3, 4, 5] ],[6, 7, 8, 9, 10, [1, 2, 3, 4, 6] ],[11, 12, 13, 14, 15, [1, 2, 3, 4, 5] ],[16, 17, 18, 19, 20, [1, 2, 3, 4, 5] ]];console.log(myMultiArray[1][5][4]);// Outputs 6, the value in the last element of the last element of the second element of myMultiArray.
Booleans
Boolean literals
Syntax
truefalse
Boolean logical operators
Syntax
expression1 && expression2// Returns true if both the expressions evaluate to trueexpression3 || expression4// Returns true if either one of the expression evaluates to true!expression5// Returns the opposite boolean value of the expression
Example
if (true && false) {;// This block is not entered because the second expression is false}if (false || true) {// This block is entered because any one of the expression is true}if (!false) {// This block is entered because !false evaluates to true}!!true // Evaluates to true
Example
if (!false && ( false || (false && true) )) {console.log('Guess what...');}/* Not executed because!false && ( false || (false && true) ) - becomes!false && ( false || false) - becomestrue && false , which is false.*/
Example
/* An important thing to note here is the Operator Precedence - which determines the order in which operators are evaluated. Operators with higher precedence are evaluated first. Thus among the four - () , && , || , ! */// Brackets - have the highest precedence// ! - lower than Brackets// && - lower than !// || - the lowestif (true && !!false || true) {console.log('Guess again ??');}/* Executed , here is the evaluation process-true && !!false || true - becomestrue && false || true - (no brackets present , so ! evaluated ) becomesfalse || true - (then && evaluated) which becomes true */
Example
/* Next important thing is the Associativity - which determines the order in which operators of the same precedence are processed. For example, consider an expression: a * b * c. Left-associativity (left-to-right) means that it is processed as (a * b) * c, while right-associativity (right-to-left) means it is interpreted as a * (b * c). */// Brackets , && , || have left to right associativity// ! has right to left associativity!false && !!false // false// evaluated in the manner - !false && false - true && false - false
Comparison operators
Syntax
x === y // Returns true if two things are equalx !== y // Returns true if two things are not equalx <= y // Returns true if x is less than or equal to yx >= y // Returns true if x is greater than or equal to yx < y // Returns true if x is less than yx > y // Returns true if x is greater than y
“Truthy” and “Falsy”
Only Boolean literals (true
and false
) assert truth or false, but there are some other ways too to derive true or false. Have a look at the examples.
Example
if (1) {// Output 'True!', since any non-zero number is considered to be trueconsole.log('True!');}if (0) {// Not executed, since 0 evaluates to falsyconsole.log('I doubt if this gets executed');}if ('Hello') {// Gets executed because non-empty strings are truthyconsole.log('So, any non-empty String is also true.');}if ('') {// Not executedconsole.log('Hence , an empty String is false');}
Read more
- https://developer.mozilla.org/en-US/docs/Glossary/Falsy
- https://developer.mozilla.org/en-US/docs/Glossary/Truthy
==
vs. ===
A simple explanation would be that ==
does just value checking (no type checking ), whereas, ===
does both value checking and type checking. Seeing the examples may make it all clear. It is always advisable that you never use ==
, because ==
often produces unwanted results.
Syntax
expression == expressionexpression === expression
Example
'1' == 1 // true (same value)'1' === 1 // false (not the same type)true == 1 // true (because 1 evaluates as truthy, though it's not the same type)true === 1 // false (not the same type)
Code Comments
Code comments are used for increasing the readability of the code.If you write 100 lines of code and then forget what each function did, it’s not useful at all. Comments are like notes, suggestions, warnings, etc. that you can put for yourself. Code comments are not executed
Single Line Comment
Anything on the line following //
will be a comment while anything before will still be code.
Syntax
console.log('This code will be run');// console.log('Because this line is in a comment, this code will not be run.')// This is a single line comment.
Multi-Line Comment
Anything between /*
and */
will be a comment.
Syntax
/* This isa multi-linecomment!*/
Example
/*console.log('Hello,I won't be executed.');console.log('Hello ,I also will not be executed');*/
Console
console.log
Prints text to the console. Useful for debugging.
Example
const name = 'Codecademy';console.log(name);
console.time
This function starts a timer which is useful for tracking how long an operation takes to happen.You give each timer a unique name, and may have up to 10,000 timers running on a given page.When you call console.timeEnd()
with the same name, the browser will output the time, in milliseconds, that elapsed since the timer was started.
Syntax
console.time(timerName);
Example
console.time('My Math');const x = 5 + 5;console.log(x);console.timeEnd('My Math');console.log('Done the math.');/* Output:10My Math: (time taken)Done the math.*/
Read more
- https://developer.mozilla.org/en-US/docs/Web/API/console.time
- https://developer.mozilla.org/en-US/docs/Web/API/console.timeEnd
console.timeEnd()
Stops a timer that was previously started by calling console.time()
.
Syntax
console.timeEnd(timerName);
Example
console.time('My Math');const x = 5 + 5;console.log(x);console.timeEnd('My Math');/* Output :10My Math: (time taken)*/
Read more
Functions
A function is a JavaScript procedure—a set of statements that performs a task or calculates a value.It is like a reusable piece of code. Imagine , having 20 for loops ,and then having a single function to handle it all . To use a function, you must define it somewhere in the scope from which you wish to call it. A function definition (also called a function declaration) consists of the function keyword, followed by the name of the function, a list of arguments to the function, enclosed in parentheses and separated by commas, the JavaScript statements that define the function, enclosed in curly braces, { }
.
Syntax
function name(argument1 , argument2, /* ..., argumentN */){statement1;statement2;// ...statementN;}
Example
function greet(name) {return 'Hello' + name + '!';}
Read more
Function calling
Syntax
functionName(argument1, argument2, ..., argumentN);
Example
greet('Anonymous');// Hello Anonymous!
Function hoisting
The two ways of declaring functions produce different results. Declaring a function one way “hoists” it to the top of the call, and makes it available before it’s actually defined.
Example
hoistedFunction(); // Hello! I am defined immediately!notHoistedFunction(); // ReferenceError: notHoistedFunction is not definedfunction hoistedFunction () {console.log('Hello! I am defined immediately!');}var notHoistedFunction = function () {console.log('I am not defined immediately.');}
Read more
If statement
It simply states that if this condition is true, do this, else do something else (or nothing). It occurs in varied forms.
if
Syntax
// Form : Single Ifif (condition) {// code that runs if the condition is true}
Example
if (answer === 42) {console.log('Told you so!');}
else
A fallback to an if
statement. This will only get executed if the previous statement did not.
Syntax
// If the condition is true, statement1 will be executed.// Otherwise, statement2 will be executed.if (condition) {// statement1: code that runs if condition is true} else {// statement2: code that runs if condition is false}
Example
if (animal == 'dog') {console.log('Bark, bark!');} else {console.log('Meow!');}
else if
This is like an else
statement, but with its own condition. It will only run if its condition is true, and the previous statement’s condition was false.
Syntax
// Form : else if. If the condition is true, statement1 will be executed. Otherwise, condition2 is checked. if it is true, then statement2 is executed. Else, if nothing is true, statement3 is executed.if (condition1) {statement1;} else if (condition2) {statement2;} else {statement3;}
Example
if (someNumber > 10) {console.log('Numbers larger than 10 are not allowed.');} else if (someNumber < 0) {console.log('Negative numbers are not allowed.');} else {console.log('Nice number!');}
Loops
For Loops
You use for
loops, if you know how often you’ll loop. The most often used varName in loops is i
.
Syntax
for ([let i = startValue]; [i < endValue]; [i+=stepValue]) {// Loop code here}
Example
for (let i = 0; i < 5; i++) {console.log(i); // Prints the numbers from 0 to 4}
Example
let i; // 'outsourcing' the definitionfor (i = 10; i >= 1; i--) {console.log(i); // Prints the numbers from 10 to 1}
Example
/* Note that all of the three statements are optional, i.e. , */let i = 9;// This loop is perfectly valid:for(;;){if(i === 0) {break;}console.log(i);i--;}
While Loops
You use while
loops, if you don’t know how often you’ll loop.
Syntax
while (condition) {// Your code here}
Example
let x = 0;while (x < 5) {console.log(x); // Prints numbers from 0 to 4x++;}
Example
let x = 10;while (x <= 5) {console.log(x); // Won't be executedx++;}
Read more
Do While Loops
You use do while loops, if you have to loop at least once, but if you don’t know how often.
Syntax
do {// Your code here} while (condition);
Example
let x = 0;do {console.log(x); // Prints numbers from 0 to 4x++;} while (x < 5);
Example
let x = 10;do {console.log(x); // Prints 10x++;} while (x <= 5);
Read more
Math
.random()
Returns a random number between 0 and 1.
Syntax
Math.random()
Example
Math.random(); // A random number between 0 and 1.
.floor()
Returns the largest integer less than or equal to a number.
Syntax
Math.floor(expression)
Example
Math.floor(9.99); // 9Math.floor(1 + 0.5); // 1Math.floor(Math.random() * x + 1); // Returns a random number between 1 and x
.pow()
Returns base raised to exponent.
Syntax
Math.pow(base, exponent)
Example
Math.pow(2,4); // gives 16
Read more
.ceil()
Returns the smallest integer greater than or equal to a number.
Syntax
Math.ceil(expression)
Example
Math.ceil(45.4); // 46Math.ceil(4 - 1.9); // 3
Read more
.PI
Returns the ratio of the circumference of a circle to its diameter, approximately 3.14159 or in better terms, the value of PI (π). Note in syntax , we do not put ()
at the end of Math.PI
because Math.PI
is not a function.
Syntax
Math.PI
Example
Math.round(Math.PI); // rounds the value of PI ,gives 3Math.ceil(Math.PI); // 4
Read more
.sqrt()
Returns the square root of a number.
Syntax
Math.sqrt(expression)
Example
Math.sqrt(5+4); // 3Math.sqrt(Math.sqrt(122+22) + Math.sqrt(16)); // 4
Read more
Numbers
%
(Modulus)
It returns the remainder left after dividing the left hand side with the right hand side.
Syntax
number1 % number2
Example
14 % 9 // returns 5
isNaN()
Returns true if the given number is not a number, else returns false.
Syntax
isNaN([value])
Example
const userInput = prompt('Enter a number'); // "Enter a number"if (isNaN(userInput)) {console.log('I told you to enter a number.');}// console.log executed since 'a number' is not a number// Another important thing:if (isNaN('3')) {console.log('bad');}// Not executed because the string "3" gets converted into 3, and 3 is a number
Basic Arithmetic
Doing basic arithmetic is simple.
Syntax
4 + 5; // 94 * 5; // 205 - 4; // 120 / 5; // 4
Prefix and Postfix increment/decrement operators
Prefix increment / decrement operators are operators that first increase the value of the variable by 1 (increment) or decrease the value of an expression / variable by 1 (decrement) and then return this incremented / decremented value. They are used like ++
(variable) [increment] or --
(varaible) [decrement] On the other hand , Postfix increment / decrement operators are operators that first return the value of the variable and then increase the value of that variable by 1 (increment) or decrease the value of the variable by 1 (decrement) . They are used like (variable)++
[increment] or (varaible)--
[decrement].
Syntax
// Prefix Decrement:--variable// Prefix Increment:++variable// Postfix Decrement:variable--// Postfix Increment:variable++
Example
// The examples will make it clearlet x = 15; // x has a value of 15const y = x++;// since it is postfix , the value of x (15) is first assigned to y and then the value of x is incremented by 1console.log(y); // 15console.log(x); // 16let a = 15; // a has a value of 15const b = ++a;// since it is prefix , the value of a (15) is first incremented by 1 and then the value of x is assigned to bconsole.log(b); // 16console.log(a); // 16
Objects
Object Literals
Syntax
{'property 1': value1,property2: value2,number: value3}
Example
var obj = {name: 'Bob',married: true,'mother\'s name': 'Alice','year of birth': 1987,getAge: function () {return 2012 - obj['year of birth'];},1: 'one'};
Property Access
Syntax
name1[string]name2.identifier
Example
obj['name']; // 'Bob'obj.name; // 'Bob'obj.getAge(); // 24
OOP
Classes
A class can be thought of as a template to create many objects with similar qualities. Classes are a fundamental component of object-oriented programming (OOP).
Syntax
SubClass.prototype = new SuperClass();
Example
const Lieutenant = function (age) {this.rank = 'Lieutenant';this.age = age;};Lieutenant.prototype = new PoliceOfficer();Lieutenant.prototype.getRank = function () {return this.rank;};const John = new Lieutenant(67);John.getJob(); // 'Police Officer'John.getRank(); // 'Lieutenant'John.retire(); // true
Popup boxes
alert
Display an alert dialog with the specified message and an OK button. The alert dialog should be used for messages which do not require any response on the part of the user, other than the acknowledgment of the message.
Syntax
alert(message);
Example
alert('Hello World');
confirm
Displays a dialog with the specified message and two buttons, OK and Cancel.
Syntax
confirm('message') // Returns true if confirmed, false otherwise
Example
if (confirm('Are you sure you want to delete this post?')) {deletePost();}
Read more
prompt
The prompt()
displays a dialog with an optional message prompting the user to input some text. If the user clicks the “Cancel” button, null is returned.
Syntax
prompt(message);
Example
var name = prompt('Enter your name:');console.log('Hello ' + name + '!');
Read more
Strings
Strings are text. They are denoted by surrounding text with either single or double quotes.
Syntax
"string of text"'string of text'
Concatenation
Syntax
string1 + string2
Example
'some' + 'text'; // returns 'sometext'const first = 'my';const second = 'string';const union = first + second; // union variable is the string 'mystring'
.length
Returns the length of the string.
Syntax
string.length
Example
'My name'.length // 7 , white space is also counted''.length // 0
.toUpperCase()
, .toLowerCase()
Changes the cases of all the alphabetical letters in the string.
Example
'my name'.toUpperCase(); // Returns 'MY NAME''MY NAME'.toLowerCase(); // Returns 'my name'
.trim()
Removes whitespace from both ends of the string.
Syntax
string.trim()
Example
' a '.trim(); // 'a'' a a '.trim(); // 'a a'
Read more
.replace()
Returns a string with the first match substring replaced with a new substring.
Example
'original string'.replace('original', 'replaced'); // returns 'replaced string'
.charAt()
Returns the specified character from a string. Characters in a string are indexed from left to right. The index of the first character is 0, and the index of the last character in a string called stringName
is stringName.length - 1
. If the index you supply is out of range, JavaScript returns an empty string.
Syntax
string.charAt(index) // index is an integer between 0 and 1 less than the length of the string.
Example
'Hello World!'.charAt(0); // 'H''Hello World!'.charAt(234); // ''
Read more
.substring()
Returns the sequence of characters between two indices within a string.
Syntax
string.substring(indexA[, indexB])// indexA : An integer between 0 and the length of the string// indexB : (optional) An integer between 0 and the length of the string.
Example
'adventures'.substring(2,9); // Returns 'venture'// substring starts from indexA(2) , and goes up to but not including indexB(9)'hello'.substring(1); // returns 'ello''Web Fundamentals'.substring(111); // returns '''In the market'.substring(2,999); // returns ' the market''Fast and efficient'.substring(3,3); // returns '''Go away'.substring('abcd' , 5); // returns 'Go aw'// Any non-numeric thing is treated as 0
.indexOf()
Returns the index within the calling String object of the first occurrence of the specified value, starting the search at fromIndex
, Returns -1
if the value is not found. The .indexOf()
method is case sensitive.
Syntax
string.indexOf(searchValue[, fromIndex]) // fromIndex is optional. It specifies from which index should the search start.Its default value is 0.
Example
'My name is very long.'.indexOf('name'); // returns 3'My name is very long.'.indexOf('Name'); // returns -1 , it's case sensitive'Where are you going?'.indexOf('are', 11); //returns -1'Learn to Code'.indexOf(''); //returns 0'Learn to Code'.indexOf('', 3); //returns 3'Learn to Code'.indexOf('', 229); returns 13 , which is the string.length
Read more
Switch statements
Acts like a big if / else if / else chain. Checks a value against a list of cases, and executes the first case that is true. It goes on executing all other cases it finds after the first true case till it finds a breaking statement, after which it breaks out of the switch If it does not find any matching case, it executes the default case.
Syntax
switch (expression) {case label1:statements1;// break;case label2statements2;// break;...case labelN:statementsN;// break;default:defaultStatement;// break;}
Example
const weather = "clear";switch (weather) {case 'clear':console.log("Beautiful day!");case 'cloudy':console.log('I wish the sun were out!');default:console.log('Some weather, huh?');}// Because there are no breaks, all three statements will be logged
Ternary Operator
The ternary operator is usually used as a shortcut for the if statement.
Syntax
condition ? expr1 : expr2
Example
const grade = 85;console.log('You ' + (grade > 50 ? 'passed!' : 'failed!'));//Output: You passed!/* The above statement is same as saying:if(grade > 50){console.log('You ' + 'passed!'); // or simply 'You passed!'}else{console.log('You ' + 'failed!');}*/
Variables
Variable Assignment
Syntax
var name = value;
Example
var x = 1;var myName = 'Bob';var hisName = myName;
ES6 const
and let
Syntax
// let variables can be reassignedlet message = 'I can be reassigned!';// const variables cannot be reassignedconst message2 = 'I cannot be reassigned';
Scope
let
and const
are both scoped to the block in which they are initialized. This can be a smaller scope than var
variables, which are scoped to the function in which they are initialized.
const dog = true;if (dog) {let mood = 'happy'}console.log(mood)// Error! mood is scoped to the if block, so it is not defined outside that block.
Variable Reassignment
Syntax
varname = newValue
Example
// Declare variable and give it value of 'Michael'let name = 'Michael'// Change the value of name to 'Samuel'name = 'Samuel'
const
variables cannot be reassigned and attempting to do so will throw a TypeError
:
Example
// Declare variable and give it value of 'Michael'const name = 'Michael'// Try changing the value of name to 'Samuel'name = 'Samuel'// Throws:// TypeError: Assignment to constant variable.
Author
'The Codecademy Team, composed of experienced educators and tech experts, is dedicated to making tech skills accessible to all. We empower learners worldwide with expert-reviewed content that develops and enhances the technical skills needed to advance and succeed in their careers.'
Meet the full team